Page 19 - PHI - Cierrapuertas

Cylinder Functions

Cylinder Dogging Kit
To convert from hex key dogging
to cylinder dogging in the field, a
cylinder dogging kit is available.
The kit consists of a channel filler,
blocking ring, cylinder locator
Cylinder Dogging and lock nut. Requires the use
Available for all Apex Series Devices except Fire Exit of a 1-1/4” mortise cylinder, not furnished standard. Specify when
Hardware and Delayed Egress Devices. required.
Cylinder Dogging provides the ability to lock down the touch To Order: specify CDK-3, NCDK-3 for up to 3-0 and CDK4,
bar with a key cylinder so the door can be used in the push/pull NCDK-4 for devices up to 4-0.
mode. To order, specify suffix “CD” (e.g. 2103CD). Requires the Note: The channel fillers are different lengths for narrow and wide stile devices.
use of a 1-1/4 mortise cylinder, not furnished standard. Specify “NCDK” - Narrow Cylinder Dogging Kit.
when required.
Less Dogging
Available for all Apex Series Devices except Fire Exit

Double Cylinder Kits - Handed
The kit is available to convert 2103, FL2103, 2303 and FL2303 devices
to 2110, FL2110, 2310 and FL2310 in the field.
2110 Rim Device - Handed Rim Kit No. RDC10 – Includes locking assembly, cylinder assembly,
cylinder collar and active case cover. Two rim type cylinders are
required, not furnished standard.
Mortise Kit No. MDC10 – Includes M310 Mortise Lock, extension
assembly, cylinder bracket, cylinder collar and active case cover. One
rim type and one 1-1/4” long mortise type cylinder required, not
2310 Mortise Device - Handed furnished standard.
To Order: Specify Hand and Finish (e.g. RDC10 RHRB 630)
Double Cylinder - Handed (“10” Function)
The Double Cylinder option is available on the Wide Stile
Rim and Mortise Exit Devices. The inside key cylinder locks Cylinders
or unlocks the outside Trim and the outside key cylinder Cylinders are not furnished standard with the device or trim.
retracts the latchbolt. Specify Outside Trim with “08” function. BEST 7 pin standard. Available in 612 finish. Specify Type and
finish when ordering. (e.g. 1E74 x 630)
When only the inside key cylinder is required to lock or
unlock the outside trim and no outside cylinder operation is
necessary, specify outside trim with “14” function. 1/16”
Cylinders – Not furnished standard. 1-1/8”
Rim Devices – Two rim type required.
Mortise Devices – One rim type and one 1-1/4” long mortise
type required. 1-1/4” 1/4”
Type Device No. Trim No. Rim Cylinder - 1E72 x Finish
Rim 2110, FL2110 x 4908A, V4908A, 4914A
5/16”
Mortise 2310, FL2310 x M4908A, VM4908A, M4914A
To Order: Specify Hand and Finish (e.g. 2110 4908A RHRB 630) 3/4”
1-1/8”

1-1/4”
Mortise Cylinder - 1E74-C4 x Finish

Apex 2000 Series Touchbar Exit Devices 19