Page 18 - PHI - Cierrapuertas

Mullions

Mullion
Cap
MC822

Key Removable Mullion Cap Spacer
Mullion Cap MCS822
KMC822
(Rim Cylinder required)

Interlock Stabilizer
S1447 ST989

Removable Mullions
The Mullion is used to adapt a double door opening to two single door openings with Rim Exit Devices. When
the full width of an opening is required, the mullion may be removed.
Key Removable Mullion (KR) – Provides a secure yet quick & easy means of removing the 822 or FL822 Mullion.
The mullion can be reinstalled and locked without the need of the key.
Stock Size – For openings 8’-0” high. For openings less than 8’-0” high the mullion can be cut down. For openings
greater than 8’-0” high using the 822, KR822 or 811 mullions, consult factory.
Finishes –
• 605 • 689 • 695
For finish description see page 3.
Mullion 822, FL822, KR822, FLKR822 Mullion
Base U.L. Listed – FL822 and FLKR822 listed for Fire Exit Hardware. For FIRE LABEL RATING Chart see page 33.
MB822
Mullion – 2” x 3” Steel.
Mullion Mullion Base – Investment Cast Steel, 2” wide 3-1/2” deep. Furnished with steel anchors for concrete floors.
Cap Interlock – Black Powder Coated Investment Cast Stainless Steel. Furnished standard for FL822 and FLKR822
MC811
Mullions. It interlocks the mullion to the Rim Active Case and S300 or S301 strike.
Stabilizers – Black Powder Coated Steel. Stabilizers are furnished standard for FL822 and FLKR822 Mullions.
Mullion Cap Spacer – Minimum width 3-1/2”. For 2-1/4” frame spacer specify part No. MCS822. For use with 822
series mullion only (e.g. 822, FL822, HC822, HCKR822, KR822, FLKR822). MCS822 Kit or 822 mullion sufix option.
See “To Order” example below.
822, FL822 Mullion Cap – MC822 Investment Cast Steel, 4” wide 3-5/8” deep.
KR822, FLKR822 Key Removable Mullion Cap Assembly – Investment Cast Steel - can be ordered to convert
existing 822 or FL822 mullions to Keyed Removable Mullions. Retrofits to the hole pattern of an MC822 Mullion
Cap. To order specify: KMC822 or KMC822F.
Cylinder – not furnished standard - Rim Type required. See page 19 for cylinder details.
HC822, HCKR822 Mullion
Mullion – 2” x 3” Steel Mullion is reinforced with a 1-1/2” x 2-1/2” 11 gage Steel Tube. MC822 or KMC822 Mullion
Cap and MB822 Mullion Base Assemblies are used to secure the HC Mullion in the door opening. The S1447
Interlock must be used to Interlock the Active Case with the strike and is furnished standard with the HC822
Mullion. To Order: Specify Mullion No. Height Finish (e.g. MCS822 x 8’-0” x 600)
811 Mullion
Mullion – 2” x 2” Steel Mullion.
Mullion Cap – Cast 4-1/2” wide x 2-5/16”, furnished with machine screws for metal frames.
Mullion Base – Cast 2” wide x 2-3/4”, furnished with sheet metal screws and plastic anchors.
To Order: Specify Mullion No. Height Finish (e.g. 822 x 8’-0” x 600)

Mullion
Base
MB811
18 Apex 2000 Series Touchbar Exit Devices