Page 73 - Herrajes Patricios - Catalogo LCN

EDA mount 4040XP
4" Series
102 mm

5-1/4"
3-1/2" 133 mm Mounting details
2-1/4" 89 mm
57 mm
B 14-1/16" A 12-1/4" EDA and CUSH
357 mm 311 mm
Mounting

5-1/4"
133 mm
4040XP-18PA

CUSH mount

4"
102 mm

5-1/4"
3-1/2" 133 mm
2-1/4" 89 mm
57 mm
B 14-1/16" 6" A 12-1/4"
357 mm 152 mm 311 mm

5-1/2"
140 mm
4040XP-18PA

Clearance 4040XP-62EDA is 5-1/2˝ (140 mm) from door face. 6˝ (152 mm) for CUSH
Head Frame Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419
CUSH ARM Requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage where reveal is less than 3-1/16˝ (78 mm)
Delayed Action n Incorporates standard 4041 cylinder, without XP cylinder.
n Delays closing from maximum opening to ; 115˚ with 180˚ template, 95˚ with 110˚ template, 85˚ with 100˚
template, 75˚ with 90˚ template. Delay time adjustable up to approximately 1 minute.
Maximum Opening CUSH arms can be templated for
EDA arm can be templated for points at: opening/hold-open point at:
110°: A = 6-3/8˝ (162 mm) 85°: A = 7-15/16˝ (202 mm)
B = 7-3/4˝ (197 mm) B = 9-1/8˝ (232 mm)
or 180°: A = 2-7/8˝ (73 mm) 90°: A = 7-3/16˝ (183 mm)
B = 4-1/4˝ (108 mm) B = 8-1/2˝ (216 mm)
Hold-open points up to maximum opening 100°: A = 6-1/16˝ (154 mm)
with HEDA arm B = 7-1/4˝ (184 mm)
or 110°: A = 5-1/16˝ (129 mm)
B = 6-3/8˝ (162 mm)
Notes:
• 4040XP Series closers ordered with EDA or CUSH arms include 4040XP-201 FIFTH HOLE SPACER to support the shoe
• Spring Cush stop points are approximately 5˚ more than templated stop point
• Hold open at templated stop points

LCN Door Control Catalog B41
phone: 877-671-7011 n fax: 800-248-1460 n www.allegion.com/us n 009426 rev. 07/17