Page 28 - PHI - Cierrapuertas

Electric Devices

E2103, E2203, E2703 and E2803 Electric Device E2303 Electric Mortise Device
Available for 2100, 2200, 2700 and 2800 Series Devices. The Electric The Electric Mortise Device controls entry by remote locking or
Device controls entry by remote locking or unlocking of the unlocking of the outside trim. In addition to a 24 VDC solenoid, the
outside trim. In addition to a 24 VDC solenoid, the exit device is also mortise lock is also equipped with a SPDT - single pole double throw
equipped with a SPDT - single pole double throw switch. The switch switch. The switch monitors the outside trim (locked or unlocked).
monitors the outside trim (locked or unlocked). The device is furnished standard as Fail Secure (FSE). When power is
The device is furnished standard as Fail Secure (FSE). When power off the trim is locked. Power is applied to unlock the trim. May be field
is off the trim is locked. Power is applied to unlock the trim. May be converted to the Fail Safe (FS) mode. (FS) - power is applied to lock the
field converted to the Fail Safe (FS) mode. (FS) - power is applied trim. Specify (FS) or (FSE) mode when ordering. Specify outside Trim
to lock the trim. Specify (FS) or (FSE) mode when ordering. Specify with “08” function. The outside key cylinder retracts the latchbolt for
outside Trim with “08” function. The outside key cylinder retracts the mechanical override. If outside cylinder (mechanical override) is not
latchbolt for mechanical override. If outside cylinder (mechanical required, specify outside trim with “14” function.
override) is not required, specify outside trim with “14” function. Field Conversion
E2103K Electric Rim Device Kit To convert 2303, FL2303 devices to E2303, FLE2303 devices in the field
To convert 2103, FL2103 devices to E2103, FLE2103 devices a Electric Mortise Lock is required. Specify EM303, EM303F, LSEM303 or
in the field. The Kit includes Trim locking assembly and Electric LSEM303F (see below for Electric Mortise Locks).
“E” locking assembly. Electrical Ratings
Note: The exit device can be used as a conduit for wiring to the hinge Switch rated to 2 Amps at 24VDC SPDT
side of the door. Solenoid current draw: 0.2 Amps.
Electrical Ratings
Switch rated to 2 Amps at 24VDC SPDT To Order:
Device: specify prefix “E” (e.g. E2303 FSE M4908A)
Solenoid current draw: 0.3 Amps.
Note: “E” locked/unlocked requires “08” or “14” function for outside lever trim.
To Order:
Device: specify prefix “E” (e.g. E2103 FSE 4908A)
Rim Device Kit: specify Kit No. (e.g. E2103K FSE)
Note: “E” locked/unlocked requires “08” or “14” function for outside lever trim.

Electric Mortise Lock - Handed 1-1/4” 4-1/8”
The Mortise lock is available with the following electrical options: 2-3/4”
MODEL NO. DESCRIPTION
LSM303, LSM303F latchbolt monitoring, “03” Function 4” 7/8”
LSM308, LSM308F latchbolt and trim locked or unlocked 8”
monitoring, “08” Function 5-3/4”
EM303, EM303F electric lock/unlock with switches to
monitor the outside trim (locked or 5/16”
unlocked)
LSEM303, LSEM303F electric lock/unlock with switches to
monitor the outside trim (locked or
unlocked) and to monitor the latchbolt
Wiring Diagram
Electrical Ratings LATCHBOLT MONITORING
Switch rated to 2 Amps at 24VDC SPDT NORMALLY OPEN /
NORMALLY CLOSED SWITCH
Solenoid current draw: 0.2 Amps.
Mortise Lock is furnished standard as Fail Secure (FSE). When LOCK / UNLOCK MONITORING
NORMALLY OPEN /
power is off the trim is locked. Power is applied to unlock the trim. NORMALLY CLOSED SWITCH
May be field converted to the Fail Safe (FS) mode.
(FS) - power is applied to lock the trim.
To Order: Specify EM303 x (FSE) or (FS) x handing x finish
(e.g. EM303 FSE RHRB 630).

28 Apex 2000 Series Touchbar Exit Devices