Page 29 - PHI - Cierrapuertas

Monitoring Switches

Touchbar Monitoring Latchbolt Monitoring
Available for all Apex Series Devices. The Touchbar Monitoring Available for Wide Stile Rim, Mortise and Vertical Rod Devices. The
Switch is an internally mounted switch that is used to Latchbolt Monitoring Switch is an internally mounted switch that
signal electromagnetic locks, horns, monitoring stations or monitors the position of the latchbolt.
otherelectronic components. Mortise LS option monitors auxiliary position. The switch can be used
• UL Listed for Panic and Fire for Class II Circuitry. to signal a monitoring station or an alarm such as a Precision ALK/ALW
• TS and TDS can be used in combination with all Apex options Exit Alarm. For the security of the opening a Door Position Monitoring
including ELR Devices. Switch is recommended.
TS – (SPDT - Single Pole, Double Throw) version allows for interface • UL Listed for Panic and Fire for Class II Circuitry.
with one external component. A (2) wire power transfer is required, • LS and LDS can be used in combination with all Apex
not furnished standard. options including ELR Devices.
TDS – (DPDT - Double Pole, Double Throw) version allows for LS – (SPDT - Single Pole, Double Throw) version allows for inter-face
interface with two external components. A (4) wire power transfer with one external component. A (2) wire power transfer is required, not
is required, not furnished standard. furnished standard.
To Order: specify prefix TS or TDS (e.g. TS2108) LDS – (DPDT - Double Pole, Double Throw) version allows for interface
Touchbar Monitoring Conversion Kit with two external components. A (4) wire power transfer is required,
TS and TDS options are available as kits, specify TSK309 for Single not furnished standard.
Switch Monitoring or TDSK310 for Double Switch Monitoring. To Order: specify prefix LS or LDS (e.g. LS2108)
Electrical Ratings Latchbolt Monitoring Conversion Kit
TS – Switch rated to 2 Amps at 24VDC SPDT LS or LDS option is available as a kit for Wide Stile Devices, specify
TDS – Switch rated to 2 Amps at 24VDC DPDT LSRK298 or LDSRK299 for Rim Devices or LSVK910 for Vertical Rod
Devices. For Mortise Devices see Electric Mortise Lock, page 28.
Electrical Ratings
Weatherized Touchbar Monitoring LS: Switch rated to 2 Amps at 24VDC SPDT
Available for all Apex Series Devices. Weatherized Touchbar LDS: Switch rated to 2 Amps at 24VDC DPDT
Switch WTS/WTDS is designed for use on a variety of exit device
applications where contact with the elements may occur. Provided
with the same specifications as the standard Touchbar monitoring.
• Meets the requirements of MIL-STD 810F, Method 506.4, Driving
Rain Test (simulating 4 in./hr. rain with 40 mph wind)
• Meets the requirements of MIL-STD 810F, Method 509.4, Salt
Fog test (simulating effects of corrosive environments similar to
atmospheric conditions found in costal regions)
To Order: specify prefix WTS or WTDS (e.g. WTS2108)
Door Position Monitoring Switch
A Magnetic Reed type switch used to monitor the position of a door
from a remote location. It is mounted in the Touchbar Endcap and
Door Frame.
Electrical Ratings 1.5 Amps at 24VDC SPDT
To Order:
Wide Stile: specify DS880 and finish.
Narrow Stile: specify NDS986 and finish.
Note: The recommended gap between the magnet and the door position switch
when installed is 1/16” - 1/8”. Please consider the distance between the exit device
end cap and the frame. Depending on your application, the strike, and the template
used, the switch and magnet can be adjusted and may extend from the device and/
or frame. Please consult the factory for installation consideration.

Apex 2000 Series Touchbar Exit Devices 29