Page 42 - Antipanico Von Duprin

Signal Switch SS

The SS signal switch feature is used
to signal the unauthorized use of an
opening. Available in rim, mortise and SS33/SS35
vertical rod, these devices are equipped
with two internal SPDT (single pole
double throw) switches. One switch
monitors both the touch bar and the
latch bolt assembly, making the latch SS98/SS99
bolt tamper resistant, for positive
security. An additional SPDT switch is Rim device shown — Refer to 33/35 or 98/99 Series catalog for complete product
1
connected to the 1 ⁄4˝ (32mm) mortise information, mounting styles, outside trim, finishes, etc.
cylinder (cylinder not furnished) for
alarm “bypass” (momentary
Minimum Door Width: 3´ (914mm) UL listed FVSR SA163 panic hardware
switch — not time delay). and/or GXHX R4504(N) fire exit
device–2´6˝ (762mm), 4´ (1219mm) hardware — consult device catalog for
The device can be connected to a device–3´0˝ (914mm) complete device listing information.
security console, or may be used as
a single door alarm, when used with a
horn and power supply. A continuous Actual device length will vary depending
current electric transfer must be used on device type, strike being used, stop
for transferring power from the frame height, single or double door, etc.
to the door.
SPECIFICATIONS
SS mortise lock devices are furnished Each switch rated 0.5 ampere 24VDC
with both signal switch device and
SS7500 mortise lock, total of four
switches.
The SS7500 mortise lock has the
versatility and advantages of the 7500
lock with the addition of signalling
functions to monitor latch bolt
operation and trim locking function. Supplied with 3´ (914mm) Cable at the
hinge side of door.
Emergency Exit Push to open and sound
alarm.

Blue
Red
Blue Yellow
Red Gray Green
Yellow White White
Violet Black
Latch Bolt
Switch
Key Cylinder 3' (914mm) Cord
Switch

18