Page 41 - Antipanico Von Duprin

Signal Switch RX and LX

The RX (request to exit) signal switch
feature is used to signal the use of an
opening from the push side. When the
LX33/LX35
push pad is depressed, the switch is RX33/RX35
activated. These devices are equipped
with an internal SPDT (single pole double
throw) switch which monitors the touch
bar. LX98/LX99
RX98/RX99
The LX (latchbolt monitoring) signal
switch monitors both egress and Rim device shown — Refer to 33/35 or 98/99 Series catalog for complete product
access of an opening. When the latchbolt information, mounting styles, outside trim, finishes, etc.
is retracted, the switch is activated.
These devices are equipped with an
internal SPDT (single pole double throw) SPECIFICATIONS UL listed FVSR SA163 panic hardware
and/or GXHX R4504(N) fire exit hardware
switch which monitors the latchbolt Switch rated 10 amperes @ 24VAC/ — consult device catalog for complete
position. DC resistive device listing information.
The device can be connected to a When used with inductive or capacitive
loads, switch capacity will deteriorate.
security console, or may be used as
a single door alarm, when used with a
horn and power supply. A continuous
current electric transfer must be used
for transferring power from the frame
to the door.
Most other electrical functions (EL, E) Supplied with 3´ (914mm) Cable at the
may be combined with the RX or LX hinge side of door.
feature.
RX and LX switches are available for
factory or field installation.
Blue Blue Gray Gray
Red Red White White
Yellow Yellow Violet Violet

RX Switch 3' (914mm) Cord LX Switch 3' (914mm) Cord

17