Page 4 - Bisagras Best
P. 4
GENERAL HINGE INFORMATION
STANLEY ARCHITECTURAL HARDWARE
Pin Design
• Non-rising pin construction features an easily seated pin that will not rise
• Hole in bottom tip provides for easy pin removal on button and flush tip hinges
• Pin is removed by inserting a punch or a thin rod through bottom hole of tip and
tapping upward
• Helps prevent marring of the hinge or hinge finish
• Standard feature on size 3” x 3” (76mm x 76mm) and larger hinges
Non-Removable Pins
• NRP – Set screw in barrel intercepts groove in loose pin as shown. Set screw is
not accessible when door is closed. Not available on size 3” (76mm) and smalle
Specify “NRP” (non-removable pin) when ordering
Security Stud
• Full mortise hinges are available with security studs for
added safety
• With the door in its closed position, a stud attached to one
leaf of the hinge projects into a hole in the matching leaf
• Hinged side of door cannot be moved, even with hinge pins
removed, because the stud prevents the leaves from being
slid apart
• Specify “with security stud” when ordering
Shear Resistant Stud
• Optional feature for prison hinges
• Withstands 200 foot pound (271.2-J) ram test
• Dimensionally consistent
• Keeps hinge in position even if all the screws break under attack
• Studs engage into door and frame
• Specify “SRS” when ordering
GENERAL HINGE
14