Page 2 - Herrajes Patricios - Cierrapuertas Stanley

TABLE OF CONTENTS

General Information ...........................................................2, 3 Top Jamb Application .............................................................6
Standard Application ..............................................................4 Track Rail Arm Application .....................................................7
Parallel Arm Application.........................................................5 Accessories ...............................................................................8

General Information
Introduction Adjustable Spring Power –
The D-1610 Series is a slim line closer uniquely designed to D-1610 series Door Closers are
accommodate the standard aluminum storefront application adjustable from size 2 – 5
foot print. The pinion and piston are constructed of cold forged (3lbf – 11lbf closing force measured
steel maintaining critical tolerances for reliable performance. The at 30” from the door pivot) The
non handed cylinder body incorporates a robust cast aluminum D-1611 Series Door Closers are
construction. adjustable from size 1 – 4 (2lbf –
Features – Controls the door through the entire opening and 8lbf closing force measured 30”
closing cycles by providing adjustable backcheck upon opening from the pivot). The D-1611 Series
and adjusting general and latch speeds through the closing cycle. Door Closers are designed to meet SPRING ADJUSTING NUT
entrance accessibility requirements of
5lbf opening force or less.
All Season Fluid – All season fluid eliminates the need for
(2) seasonal adjustment.
(1)
High Impact Cover (Optional) – Optional high impact self-
extinguishing decorative cover is available on all Stanley D-1610
Series Closers.
(3)
Maintenance Free – Door Closers mounted in accordance
with the provided installation instructions are maintenance free
from periodic inspection and adjustment.
(1) closing speed range 180˚ - 10˚
(2) latching speed range 10˚ - 0˚ Through Bolts and Sex Nuts – When through bolting
(3) backcheck action range 75˚ - 180˚ is ordered, factory will furnish sex nuts for use with the
machine screws furnished with the closer. Nuts are sized to
Non-Handed – Can be used on RH and LH doors for both push accommodate 1-3/8” or 1-3/4” thick doors.
side and pull side mounting. Closing Power Adjustment – The D-1610 Series Door
Non-Critical Regulation – The separate adjustments for Closers have the provision to adjust the leverage of the arms
backcheck, general and latch speeds are equipped with non- by changing the pivot position of the arm in the foot; thus the
critical “V-Slot” regulating valves which allow for fine tuning the closing force at the latch can be increased or decreased.
closing and latching speeds as well as the backcheck intensity.
Packing – All D-1610 Series Door Closers with standard arm
sets are packed for mounting on standard, parallel arm or
top jamb applications. All closer assemblies are packed 10 per
carton. Tracks for track mounted closers are packed separately.
ANSI/BHMA Specifications – The D-1610 Series Door Closers
has been Certified ANSI/BHMA A156.4 Grade 1, UL10C.

Handing
PULL SIDE PULL SIDE Arm Options
PULL SIDE PULL SIDE Suffix Description
PUSH SIDE PUSH SIDE
PUSH SIDE PUSH SIDE
L Long Rod Forearm (Top Jams only)
LEFT HAND DOOR RIGHT HAND DOOR
H Standard Hold Open
PH Parallel Hold Open

2 D-1610/D-1611 Series Door Closers