Page 6 - Stanley cerraduras wi fi
P. 6
MORTISE LOCK MORTISE LOCK Case: 0.095” cold rolled steel, 5 /8” (149mm) H x /8” (22mm) D x 4 /16” (149mm) W. Steel is zinc dichromate
7
1
7
plated for corrosion protection.
1
Faceplate: Brass or bronze material, 8” (203mm) H x 1 /4” (31mm) W x /16” (1mm) T. Lock face automatically
1
adjusts to proper bevel during installation.
Strike: Brass, bronze, or stainless steel base material, 4 /8” (124mm) H x 1 /4” (31mm) W x /32” (2mm) T. Fits
7
1
3
standard door frame cut-out as specified in ANSI A115.1. Universal (non-handed) strike supplied
standard with lock.
3
Backset: 2 /4” (69mm)
3
Door thickness: Standard lock configuration designed for doors 1 /4” thick. Thick door
configuration available for door to 3” thick (specify thickness when ordering).
Latchbolt: Solid stainless steel, /4” (19mm) throw. Latch is oil-impregnated for anti-friction
3
operation. Reversible without opening case.
Deadbolt: Stainless steel, 1” (25mm) throw.
Auxiliary bolt: Stainless steel, non-handed.
Lever handle: Brass, bronze, or stainless steel base material. Lever styles 3, 14, and 15 return to
a minimum of /2” (12mm) of door surface. Levers 12, 16, and 17 do not return.
1
Escutcheons: 10 /2” (267mm) H x 3 /16” (84mm) W x 1” (25mm) D (1” (25mm) at the top, sloping down to /4”
3
1
5
(19mm) at the bottom)
Finishes:
605 – bright brass, clear coated 625 – bright chromium plated
606 – satin brass, clear coated 626 – satin chromium plated
45HQ 611 – bright bronze, clear coated 629 – bright stainless steel
Proximity Reader 612 – satin bronze, clear coated 630 – satin stainless steel
613* – oxidized satin bronze, oil rubbed 690** – dark bronze powder coated
UltraShield ™ Antimicrobial Finishes
626AM – Satin Chrome Plated with UltraShield Antimicrobial coating
630AM – Satin Stainless Steel with UltraShield Antimicrobial coating
* 613 finish is designed to wear over time, providing an “antique” appearance.
** 690 finish will continue as a dark brown appearance over time.
ADA-Americans With Disabilities Act:
The design and operation of the mortise lock meets the intent of the standard for ANSI A117.1 section 404.2.6.
Builders Hardware Manufacturers Association:
ANSI A156.13, Series 1000, Grade 1 Operational, Strength, and Security. To meet Grade 1 Security, drill resistant cores
Underwriters Laboratories ®
The 40H series is listed by Underwriters Laboratories for use on a 3 hour A label doors. These locks also carry the C-UL mark which is officially
accepted in all of Canada, indicating compliance with appropriate Canadian standards and codes.
UltraShield ™
The UltraShield protection is limited to the product’s surface and is not meant to be a substitute for good hygiene. Stanley recommends
instituting and maintaining a thorough cleaning regimen of all your door hardware.
MORTISE LOCK — FUNCTIONS
TV Latchbolt operated by: DV Latchbolt operated by:
Deadbolt with • Outside key Latchbolt with • Outside key
key override • Outside lever - unless locked by key override • Outside lever - unless locked by
internal motor drive mechanism internal motor drive mechanism
• Inside lever • Inside lever
Latchbolt deadlocked by: Latchbolt deadlocked by:
• Auxiliary latch • Auxiliary latch
Deadbolt operated by: Outside lever locked and unlocked by:
• Outside key • Internal motor drive mechanism
• Inside turn knob operated by time-activated electronic
• Outside lever when lever is unlocked signal or by valid card/PIN
by internal motor drive mechanism
(retracts only) Inside lever is always unlocked
• Inside lever (retracts only)
Outside lever locked and unlocked by:
• Internal motor drive mechanism
operated by time-activated electronic
signal or by valid card/PIN
Inside lever is always unlocked
WIRELESS ACC
6