Page 10 - Cerraduras cilindricas stanley
P. 10
SAMPLE SPECIFICATIONS
ACCEPTABLE MANUFACTURERS
A. Locksets and Latchsets
Best Access Systems - No Substitution.
3
1
1. Locksets must be medium-duty cylindrical type with 2 /8 inch backset, or greater as specified, with a /2 inch
throw latchbolt.
2. Provide locksets with Best 7-pin interchangeable core.
3. Locksets and latchsets must conform to ANSI A156.2, Series 4000, Grade 2, and be UL listed.
4. Locksets and cores to be of the same manufacturer to maintain complete lockset warranty.
5. Locks to have solid shank with no opening for access to keyed lever keeper.
6. Keyed lever to be removable only after core is removed, by authorized control key, to allow access to lever "keeper".
7. Permanent core face must be the same finish as the lockset finish.
8. Levers must be zinc material with a minimum wall thickness of .060.
B. Keys and Keying
A. Provide construction cores and keys during the construction period. Construction, control and operating keys
and cores shall not be part of the Owner's permanent keying system or furnished on the same keyway as the
Owner's permanent keying system. Permanent cores and keys prepared according to the accepted keying
schedule will be furnished to the Owner by the local Best Access Systems office prior to occupancy. The Owner
or Owner’s agent will install permanent cores and return the construction cores to the Best Access Systems office.
B. All cylinders shall be Best 7–pin, interchangeable core and keyed into a [new] [existing] factory registered
Grand Master Key System with a restricted keyway.
C. Permanent keys and cores shall be stamped with the applicable key mark for identification. These visual key
control marks or codes will not include the actual key cuts. Permanent keys will also be stamped ["Do Not
Duplicate".] ["U.S. Gov.-Do Not Duplicate".] [ .]
D. Grand Masterkeys, Masterkeys and other Security Keys shall be transmitted to the Owner by U.P.S.,
delivery confirmation requested.
E. Furnish keys in the following quantities:
1 each Grand Masterkey
2 each Masterkeys per set
1 each Change key per each keyed core
2 each Construction masterkeys
2 each Control keys
®
F. Computer key and core control software Best Access System Keystone 600 will be provided and registered to the
owner by the local Best Access Systems office. The owner will furnish compatible hardware to operate the key and
core control program. The Best Access Systems office will provide initial training on computer key and core
control as well as on-going support including software updates.
PATENTED KEYING
PATENTED KEYING Patented Keying
®
BEST Peaks
®
BEST Peaks – For advanced solutions in key control and security, BEST offers Peaks , the most adaptable and cost
®
effective patented keying system on the market. The patented mechanism ensures that cylinders and cores will only
®
operate with the Peaks keys, which are only available through authorized BEST distributors.
For BEST products, Peaks offers the security and convenience of a patented solution for interchangeable core. Peaks is
®
®
also available to adapt to a wide variety of locks from other manufacturers. All cylinders can be keyed into the same system,
providing you the ability to operate all the locks at your facility using a single key, regardless of the lock manufacturer.
MEDIUM DUTY
4